Sourcing Guide
Confirm OTX TF 0036ZC-01 CX0710 twin-bowl wide-base fuel filter assembly by its two-bowl layout, mounting bracket, connection arrangement and old-part photos.
A complete fuel filter assembly is matched as an assembly, not as two loose filter bowls. The mounting bracket, wide base, connection positions and bowl arrangement all belong to the comparison. This is especially important when a removed unit has two similar blue bowls but the installed base or line direction is different.
TF 0036ZC-01 is listed as a CX0710 twin-bowl wide-base fuel filter assembly in the OTX fuel filter assembly range. The listed connection clue is M14x1.5. Those details help identify the order line, but the old assembly and its installed arrangement should still be checked before a replacement is confirmed.
The visible structure is a practical starting point. TF 0036ZC-01 has two vertically suspended filter bowls beneath a long, wide metal base. A rear mounting bracket sits behind the base, while the connection points extend from opposite ends. This layout distinguishes it from a single filter, a compact twin-bowl unit with a different bracket, or an assembly that includes a pump.
Start with a full photograph rather than a close crop of one bowl. A complete view reveals the relationship between the bowls, the base and the rear bracket. It also shows whether both end connections point in the same directions as the unit being replaced.
| Check Point | Listed Detail | What to Compare on the Old Part |
|---|---|---|
| Part code | TF 0036ZC-01 | Any readable marking on the assembly, packaging or purchase list. |
| Reference clue | CX0710 twin-bowl wide-base assembly | Two-bowl arrangement, long base and the overall mounting form. |
| Connection clue | M14x1.5 | Connection form and size only after the line is safely disconnected and checked. |
| Bracket | Rear mounting bracket | Bracket profile, bolt-hole position and installed orientation. |
One matching clue is not enough to establish a replacement. M14x1.5 can help narrow a search, but it does not by itself confirm the base shape, bracket geometry or line direction. Treat the code, complete layout and connection arrangement as one set of checks.
On a complete filter assembly, the bracket affects how the unit sits in the service space. Photograph the rear face, the bolt holes and the area where the bracket meets the base. Include one wider image of the installed unit before removal when possible. This helps distinguish a similar-looking assembly whose bracket is offset, rotated or made for a different mounting point.
Then photograph both ends of the base. Show the full port shape and any fittings that remain on the old part. Do not force a comparison from an unclear photo or rely on a measurement written from memory. A sharp image of each end is more useful than several crops of the filter bowls.
The TF 0036ZC-01 listing records M14x1.5 as its connection clue. It is a helpful detail when the old assembly is available for checking, but fuel-system connections can have surrounding adapters, fittings or installed lines that change what is visible in a photograph. Confirm the actual connection form with the old part and installation view before final selection.
For safety and accuracy, leave fuel lines to qualified service personnel. The buyer can provide photos and recorded markings without disassembling an uncertain unit solely to create a match. Where the fitting detail cannot be verified, mark the line for confirmation instead of selecting by appearance alone.
Several fuel filter assemblies may appear close at a distance, but their reference clues should be kept separate. TF 0053ZC-01 is listed with 612630080087 and M16x1.5. TF 0054ZC-01 is listed with WK962/7 and M14x1.5. TF 0055ZC-01 is listed as a WK940120 twin-bowl assembly with M14x1.5, while TF 0061ZC-01 is listed as an FS19922 assembly with a pump and M16x1.5.
These descriptions are reference clues, not a statement that the assemblies interchange. The presence of a pump, a different listed connection clue, or a different base and bracket is enough to require a separate confirmation. Keep each required assembly on its own line in a purchase list.
Keep the complete TF 0036ZC-01 assembly separate from individual fuel filters and other filters and maintenance parts. A clear list makes it easier to check which lines are complete assemblies and which are replacement filters. Different truck-parts lines can be prepared together for one shipment while each part remains identifiable for confirmation.
Send TF 0036ZC-01 or the CX0710 clue when available, full views of the old assembly, bracket and connection photos, any readable markings, quantity and the rest of the required purchase list. This information supports a more accurate review before quotation.
Send a fuel filter assembly inquiry with the photos and your parts list for matching support.
Use this guide to organize a clearer quote request instead of choosing from a short product list.
Part number, truck brand, model, engine model, chassis number and old-part photos help confirm the correct replacement before quotation.
Filters, brake parts, clutch parts, chassis parts, cab parts, bearings, sensors and assemblies can be checked together for one practical order.
Share quantity, packing preference and whether the order is for fleet repair, workshop use or distributor stock.
Send part numbers, truck models, chassis numbers, old-part photos or sample photos. We can help check multiple items and combine them into a practical export order.